![background image](http://html1.mh-extra.com/html/adicos/gsme-m4/gsme-m4_operating-manual_2851350025.webp)
23
ADICOS GSME
405-2010-003 EN52
InSTALLATIOn
5.4.2
Connecting the ADICOS connection cable with the ADICOS AAB
Depending on the system and detector configuration, the specific wiring of the ADICOS con
-
nection cable and the ADICOS branching and connection box (ADICOS AAB) varies. The fol
-
lowing procedure applies for all wiring variants.
Wiring the ADICOS AAB
1
Open the enclosure cover of the ADICOS AAB
2
Open the lower cable gland of the ADICOS AAB
3
Route the ADICOS connection cable through the lower cable gland into the ADICOS AAB
4
Connect the wires to the connection terminals of the ADICOS AAB according to the wiring
diagram
5
Close the cable gland of the ADICOS AAB
6
Close the enclosure cover of the ADICOS AAB
Further information on the installation of the ADICOS branching and connection
box can be found in
GTE instructions no. 430-2410-001
!
A
A
Summary of Contents for GSME-M4
