STRUCTURE
10
ADICOS GSME
405-2010-003 EN52
3.2 Display elements
Signal LEDs
For indicating operating conditions, three light pipes are recessed in
the enclosure cover of the detector. They are used to visualize the
signal LEDs located on the detector board.
The top signal LED »Alarm« is red, the center »Operation« is green
and the bottom »Fault« is yellow.
For the function of the signal LEDs, see
.
vv
3.3
Circuit board connections
Slot “detector connection”
The detector connection slot is a coded, 14-pin connector on the
left side of the detector board.
In the factory configuration, it is connected to the detector con
-
nection (Amphenol bayonet plug-in coupling) in the lower enclosure
part.
v
v
Slot “configuration module”
The configuration module slot is a coded, 16-pin connector on the
right side next to the detector connection slot and underneath the
signal relay on the detector board.
Depending on the order configuration the slot is equipped with a
configuration module, on which the resistors for the limit value con
-
tacts is defined.
v
v
Summary of Contents for GSME-M4
