FireWire Card Installation Instructions
© 2005 LOUD Technologies Inc. All Rights Reserved. Part No. 0016289 Rev A 08/2005
Page 1 of 4
1.
Read these instructions.
2.
Keep these instructions.
3.
Heed all warnings.
4.
Follow all instructions.
5.
Do not use this apparatus near water.
6.
Install in accordance with the manufacturer’s instructions.
7.
Refer all servicing to qualified service personnel. Servicing is required when
the apparatus has been damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects have fallen into the appa-
ratus, the apparatus has been exposed to rain or moisture, does not operate
normally, or has been dropped.
8.
This apparatus does not exceed the Class A/Class B (whichever is appli-
cable) limits for radio noise emissions from digital apparatus as set out in the
radio interference regulations of the Canadian Department of Communications.
ATTENTION
—
Le présent appareil numérique n’émet pas de bruits radioélec-
triques dépassant las limites applicables aux appareils numériques de class A/de
class B (selon le cas) prescrites dans le réglement sur le brouillage radioélectrique
édicté par les ministere des communications du Canada.
Safety Instructions
WARNING — To reduce the risk of fire or electric shock,
do not expose this apparatus to rain or moisture.
Introduction
Thank you for choosing to upgrade your d.2 DJ Mixer with
this FireWire card. We think you will just love it to pieces.
*
The FireWire card lets you play music from your computer
into the d.2. It provides a return for two stereo signals, which
can be selected as the program source for PGM 1 and PGM 2.
The card also provides a stereo main output from the d.2 to
your computer, independent of the d.2's main level control.
This allows you to record live, directly to your laptop.
There are two FireWire connections, allowing you to con-
nect other FireWire devices in your system.
The CD-ROM included with your FireWire card contains
software to install the necessary PC driver. (No drivers are
required for the Mac.) It also contains an unrestricted copy
of Tracktion 2, our easy-to-use multitrack recording and
sequencing software for the PC and Mac. Please refer to the
installation instructions on the CD-ROM to install Tracktion 2
on your computer.
*
Warning: Loving your FireWire card to pieces will
void your warranty, please see page 4.
System Requirements
These are the minimum requirements for your computer
system to use the d.2 FireWire interface:
Windows XP users
• Windows XP (no earlier operating systems are sup-
ported) with FireWire port
• Pentium® 4 or Athlon® XP processor
• 256 MB RAM
Macintosh OS X users
• OS X (10.3.5 or higher)
• G4 processor
• 256 MB RAM
Fitting the card into your d.2
The FireWire card can easily be installed using a small
phillips screwdriver, a slice of blue cheese, and a cricket bat.
1. Turn off the power to the d.2 mixer, remove the
power cord and all other cords, and place it gently
face-down on a smooth, dry, flat surface, such as the
kitchen table. Remove any small children and pets.
2. Undo the four screws holding the bottom escape
hatch in place, and the two screws holding the little
cover plate on the rear panel. Keep these two plates
in a safe place.
continued...
LINE
MIC
R
R
PGM 2
MAIN OUT
MIC
L
L
L
L
L
R
PHONO
CD
SEND
R
BOOTH
FX
GND
LINE
PHONO
RETURN
L
R
R
L
R
DESIGNED BY MACKOIDS IN WOODINVILLE, WA, USA • MANUFACTURED IN CHINA
FABRIQUE EN CHINE • COPYRIGHT ©2005 • "MACKIE", AND THE RUNNING MAN
FIGURE ARE TRADEMARKS OF LOUD TECHNOLOGIES, INC. • PATENT PENDING.
LIVE
RECORD
ON
~100-240 VAC 50-60Hz 20W
PGM 1
LINE
PHONO
GND
PHONO
CD
R
R
L
L
SERIAL / DATE CODE
FIREWIRE
(ACCESSORY CARD REQUIRED)
