16
ORDINARY MAINTENANCE
REAR SQUEEGEE RUBBER REPLACEMENT
Check the squeegee rubber wear and eventually
turn or replace it.
For the replacement it is necessary to:
1.
Lower the squeegee by lowering the handle
lever (1) placed in the centre of the handle
bar.
2.
Rotate the squeegee outwards.
3.
With the squeegee in this position operate
on the wing nuts (2) unscrewing them
completely to free the squeegee.
4.
Take off the coupling (3) of the squeegee
hose and take off the squeegee.
5.
Release the catch (4) of the rubber blade
clamp and take the rubber off to turn it to a
new side or replace it.
6.
Check that the coupling and the squeegee
hose are not obstructed and if necessary,
clean the entire assembly.
To reassemble the squeegee reverse the
operations above.
FRONT SQUEEGEE RUBBER REPLACEMENT
Check the wear of the front squeegee rubber and
replace it if worn out.
For the replacement it is necessary to:
1.
Lower the squeegee by lowering the handle
lever (1) placed in the centre of the handle
bar.
2.
Rotate the squeegee outwards.
3.
With the squeegee in this position take it
off and then take off the rear squeegee
rubber (see under “REAR SQUEEGEE RUBBER
REPLACEMENT”).
4.
Take off the wing nuts (5) in the upper part
of the squeegee body, separate the two