12
traditional squeegee does not manage. Here
below some examples of how to use the
functionalities of the complete squeegee
rotation.
Wash the interested surface (1).
Rotate the squeegee to the right or to the left
(see under “COMPLETE SQUEEGEE ROTATION”) to
bring it to the front.
Lift slightly the machine (2) and get again onto
the surface to dry (3).
When the machine is lifted, release the handle
bar levers so to stop the brush rotation avoiding
therefore water splashes.
If the squeegee is not close to the central point,
even moving the lever (5) it will not lift.
During working operation, the lifting lever of the
squeegee has to be kept in the low position.
HANDLE BAR ADJUSTMENT
When approaching obstacles or near walls, it is
possible to simplify the handling of the machine
by adjusting the handle bar more vertically with
respect to the machine.
To rotate the handle bar:
1.
Lift the release lever (8) present near the
handle bar.
2.
Rotate the handle bar into the new working
position keeping the release lever (8) pulled.
3.
Release the lever (8) to lock the handle bar
in the desired position.
Once the obstacle has been passed and the
maneuver completed repeat the operation to
return to the previous working position.
This operation is possible also with the machine
in motion maintaining pressed contemporarily
the handle bar levers.
OVERFLOW DEVICE
In order to avoid serious damages to the suction
motor, the machine is equipped with a float that
intervenes when the recovery tank is full, closing
the suction hose and stopping the suction.
When this happens, it is necessary to empty the
recovery tank.
1.
Hold the exhaust hose (9) of the recovery
tank.
2.
Take off the exhaust plug and empty the
recovery tank into appropriate containers,