13
according to the standard norms for the
liquid disposal.
STOPPING THE MACHINE AFTER
CLEANING OPERATION
Before carrying out any type of maintenance:
1.
Switch off the on/off switch (1).
2.
Lift the squeegee rotating upwards the lever
(5) placed in the centre of the handle bar
(see under “SQUEEGEE LIFTING”).
3.
Move the machine to an appropriate place
for tank draining.
The machine is not equipped with a parking
brake, therefore do not leave it on slopes.
DAILY MAINTENANCE
RECOVERY TANK CLEANING
1.
Hold the exhaust hose (9) of the recovery
tank.
2.
Take off the exhaust plug and empty the
recovery tank into appropriate containers
(see under "OVERFLOW DEVICE").
3.
Take off the suction cover (10) after
rotating the blocking levers (11).
4.
Empty the tank by means of the hose (9).
5.
Rinse the tank with a water jet.
EMPTYING AND CLEANING OF THE SOLUTION
TANK AND FILTER
To empty the solution remained in the solution
tank:
1.
Move the machine to an appropriate place
for tank draining.
2.
Switch off the machine pressing the on/off
switch.
3.
Unscrew the cap (12) of the solution tank
filling and take off the filter (14).
4.
Unscrew the drain plug (13) placed in the
rear low left part of the machine and wait
that all the solution has drained off.