ADF Web HD67832-IP-B2, User Manual

Page: 34 / 42

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com Phone +39.0438.30.91.31
User Manual DALI / BACnet Master - Converter
Document code: MN67832_ENG Revision 1.000 Pagina 34 di 42
The means of the fields for the “CONTROL COMMANDS” section are:
In the “ POWER CONTROL ” bar it is possible to change the actual ADV of the selected DALI device;
In the field “ COMMAND ” it is possible to select a DALI command to send to the selected DALI device. For set commands, it is
possible to insert the value to set in the field “ xx ”. As soon as the command to send is selected, the command is sent: in order to
send the same command more times, it is possible to press the “ SEND COMMAND ” button;
In the field “ COMMAND FEEDBACK ” the response from the DALI device is printed.
Note:
This section is used to test the functioning of the DALI device in the network and to set specific parameters if ned (like new
Minimum or Maximum ADV value).
In the “GROUP MEMBERSHIP” section it is possible to see the Groups which the selected DALI device is in. The checked checkboxes mean
that the device is in the correspondent groups, the unchecked checkboxes mean that the device is not included in the correspondent groups.
It is possible to change the group settings for the selected DALI device by checking/unchecking the correspondent checkboxes.
In the “SET SCENES” section it is possible to see the programmed scenes of the selected DALI device, program new ones and activate them:
By pressing the buttons “ GO TO: SCENE X ” it is possible to activate the correspondent scene inside the selected DALI device; the
programmed ADV for the selected scene is defined in the drop-down list on the right;
By selecting a value into the drop-down lists next to the “GO TO: SCENE x” buttons, it is possible to set the ADV associated to the
correspondent scene. It is possible to select:
o
Value between 0 and 255: the scene will have the defined value of ADV;
o
ACT: the scene will take the programmed ADV value into the “POWER CONTROL” bar;
o
OFF: the scene is disabled.