ADF Web HD67832-IP-B2, User Manual

Page: 31 / 42

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com Phone +39.0438.30.91.31
User Manual DALI / BACnet Master - Converter
Document code: MN67832_ENG Revision 1.000 Pagina 31 di 42
SETUP:
This section defines the parameters of the HD67832 converter.
By Pressing the “
Setup ” button from the menu bar of the DALI Console software, the “SETUP” window appears (Fig. 10).
The means of the fields for the “SETUP” window are:
In the field “ DEVICE IP ADDRESS ” the IP address set inside the converter is defined;
In the field “ DEVICE PORT ” the communication port is defined. It is fixed to ‘10000’;
In the field “ CONSOLE PORT ” the communication port for the DALI commands is defined. It is the one defined in the field “DALI
Console Port” of the section “Set Communication” of SW67832;
In the fields “ SCI x Protocol ” the type of Ethernet communication used is defined. It is possible to leave the default setting;
If the field “ DALI 1 ONLY ” is checked, the converter will manage just DALI 1 communication;
If the field “ DISABLE AUTOMATIC SCAN ” is checked, the converter will stop the automatic scan of DALI network;
If the field “ AutoRefresh ” is checked, the converter automatically refreshes the data when a command is sent.
Figure 10: “Setup” window