ADF Web HD67832-IP-B2, User Manual

Page: 23 / 42

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com Phone +39.0438.30.91.31
User Manual DALI / BACnet Master - Converter
Document code: MN67832_ENG Revision 1.000 Pagina 23 di 42
Figure 5a: “Set BACnet Access  BACnet Read” window
SET BACNET ACCESS:
By Pressing the “
Set BACnet Access ” button from the main window of SW67832 (Fig. 2), the window “Set BACnet Access” appears (Fig.
5). The window is divided in two parts, the “ BACnet Read ” that contains the BACnet objects that the converter reads from the BACnet
devices and “ BACnet Write ” that contains the BACnet objects that the converter writes into the BACnet devices.
The means of the fields in the window “BACnet in Read” are the following:
If the field “ Enable ” is checked, the BACnet variable is enabled;
In the field “ IP Address ” the IP address of the device that contains the data to be read is defined;
In the field “ Object Type ” the object to be read is defined;
In the field “ Instance ” the instance number of the object is defined;
In the field “ Property ” the property to be read is defined;
In the field “ NByte ” the number of bytes of the BACnet object is defined;
By checking the field “ En Dest ” it is possible to enable the Destination Network (D Net), Destination Length (D Len) and Destination
Address (D Adr). These informations are used for make a request to other segments of network (through a BACnet router);
In the field “ D Net ” the destination network (from 1 to 65535) is defined;
In the field “ D Len ” the length of “D Add” field (1 or 2 or 6) is defined;
In the field “ D Add ” the address of the endpoint is defined. If “D Len” is ‘1’ it is possible to insert a number from 1 to 255; if “D Len”
is ‘2’ it is possible to insert a number from 1 to 65535; if “D Len” is ‘6’ it is possible to insert an IP and port in this format
“192.168.2.188:47808”;