Industrial
Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO:
www.adfweb.com
Phone +39.0438.30.91.31
User Manual
DALI / BACnet Master - Converter
Document code: MN67832_ENG Revision 1.000 Pagina 38 di 42
A
LL DEVICES
(B
ROADCAST
):
The means of the fields for the “CONTROL COMMANDS”
section are:
In the “
POWER CONTROL
” bar it is possible to change
the actual ADV of the entire DALI network;
In the field “
COMMAND
” it is possible to select a DALI
command to send to the entire DALI network. For set
commands, it is possible to insert the value to set in
the field “
xx
”. As soon as the command to send is
selected, the command is sent: in order to send the
same command more times, it is possible to press the
“
SEND COMMAND
” button;
In the field “
COMMAND FEEDBACK
” the response
from the DALI network is printed.
Note:
This section is used to test the functioning of the DALI
network.
In the “SET SCENES” section it is possible to activate the
programmed scenes into all the DALI devices that have them:
By pressing the buttons “
GO TO: SCENE X
” it is
possible to activate the correspondent scene in the
DALI network. Only the devices that have it will accept
the command.
Figure 15: “Broadcast settings” window
