Industrial
Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO:
www.adfweb.com
Phone +39.0438.30.91.31
User Manual
DALI / BACnet Master - Converter
Document code: MN67832_ENG Revision 1.000 Pagina 36 di 42
G
ROUPS
:
The means of the fields for the “CONTROL COMMANDS”
section are:
In the “
POWER CONTROL
” bar it is possible to change
the actual ADV of the selected DALI group;
In the field “
COMMAND
” it is possible to select a DALI
command to send to the selected DALI group. For set
commands, it is possible to insert the value to set in
the field “
xx
”. As soon as the command to send is
selected, the command is sent: in order to send the
same command more times, it is possible to press the
“
SEND COMMAND
” button;
In the field “
COMMAND FEEDBACK
” the response
from the DALI group is printed.
Note:
This section is used to test the functioning of the DALI
groups in the network.
In the “SET SCENES” section it is possible to activate the
programmed scenes to the selected group:
By pressing the buttons “
GO TO: SCENE X
” it is
possible to activate the correspondent scene inside the
selected DALI group.
Figure 13: “Groups settings” window
