adept technology MV, User Manual

Page: 6 / 404

P/N 00330-01040
Rev. A
Declaration of Conformity/Konformitätserklärung/Déclaration
de Conformité
We/Wir/Nous, Adept Technology, Inc., 150 Rose Orchard Way, San Jose, California 95134, USA,
declare under our sole responsibility that the product / erklären in alleiniger Verantwortung, daß das Produkt /
déclarons sous notre seule responsabilité que le produit:
to which this declaration relates is in conformity with the following standards. / auf das sich diese Erklärung
bezieht, mit den folgenden Normen. / auquel se réfère cette déclaration est conforme aux normes.
We declare that the machine in the form delivered by us, subject to the usage conditions specified below,
complies with the relevant and fundamental safety and health requirements defined in EU Directive
89/336/EEC, Annex I, and the following standards. The machine must not be put into operation until all of the
machinery into which it is incorporated has been declared in compliance with the provisions of the effective
versions of the directives. This includes all supplementary equipment and protective devices.
EU Directives / EG-Richtlinien / Directives Communautaire / Direttiva CE:
89/336, 91/263, 92/31, 93/68 (Machinery)
89/392, 91/368, 93/44, 93/68 (EMC)
73/23, 93/68 (Electrical Equipment)
Usage and installation conditions
The product must be installed and used strictly in accordance with the Adept MV Controller User’s Guide
(document p/n 00330-01031).
The system must incorporate only those plug-in modules and accessories listed in Table 1 or Table 2. If modules
or accessories listed in Table 2 are installed, the user must verify conformance to the EMC Directive after
installation.
This Declaration applies only to those Adept product part numbers specifically listed in this declaration. The
following changes may result in the system not complying with the applicable Directives, and would void this
declaration unless additional testing and/or evaluation is performed by the user:
•unauthorized user modifications;
•substitution or addition of Adept parts not listed on this declaration;
•addition of user-supplied parts and accessories.
17 Mar 1998
Richard J. Casler, Jr. (Vice President, Engineering) San Jose, California, USA
Control system / Steuerung/
Système de commande/
Sistema di comando:
Adept MV-5
Adept MV-10
30340-10000, -30000
30340-20000, -40000
Adept MV-4 30350-15000
Controller Interface Panel 90350-10350
Pendant/Handbediengerät/
Unità portatile:
MCP III 90332-48050
EU/EEA: IEC/ISO:
EN 55011:1991, Class A (EMC: Emissions) CISPR 11: 1990
EN 50082-2: 1995 (EMC: Immunity) —
EN 60204-1: 1992, IP20 (Electrical safety) IEC 204-1: 1992
EN 61131-2: 1992 (Programmable controllers) IEC 1131-2: 1992
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com