Page | 15
Test Protocol
The following items will be necessary for this test protocol.
ADC VelociGraph VG03-400 unit (1)
ADC 1815CAB2 cables (4-8)
RS485 serial port programming cable (1)
Additional computer (recommended)
M12 Splitters if necessary (1-4)
AC Adaptor provided with VG03 (1)
Step 1 – Software Downloads
VG03Config
The VelociGraph VG03 captures high-speed pulses from external sensors (typically an ADC
iBeam Sensor, or other light-screen sensor), calculates the time between those pulses and, if
configured to do so, calculate the speed and the angle of the projectile that passes through the
sensors. The VG03 has 4 inputs for sensor installation. Data is available via the RS485 serial port
built into the device using a custom protocol. Refer to
VG03_OperationManual.pdf
for more
details. You will nedd the programming cable part# ADC-2325-422
Download the latest version of the VG03Config software. This software can be found at our
website
http://automateddesign.com/download/
. Also, download the VG03 Operation Manual
for instructions on how to use this program.
Recorder 5.00
Download the latest version of Recorder 5.00. This software can be found at our website
http://automateddesign.com/downloads/recorder5.00
Foxterm (Optional Non-ADC software)
Download
the
latest
version
of
Foxterm.
This
software
can
be
found
at:
http://www.foxterm.net/download/
a.
Extract all files.
b.
The software used for trouble shooting is
FoxTerm.exe