Page | 14
turn red. This is to indicate that values have been changed on the interface itself and
NOT the VelociGraph unit.
A VelociGraph unit will have the following display:
e.g.
1.
Select a VelociGraph from the tree-view list under the NETWORK panel.
Its properties will be displayed under the VELOCIGRAPH UNIT (VG03)
panel.
2.
Make the necessary changes, if any. When finished click the
Write
button.
If an error has occurred, an error message will appear.
Reading property values
1.
Select a VelociGraph from the tree-view list under the NETWORK panel.
Its properties will be displayed under the VELOCIGRAPH UNIT (VG03)
panel.
2.
Click
Read
, this will populate the VG03’s properties under the VELOCIGRAPH
UNIT (VG03) panel.
Default Values:
Note: Clicking the Set Default Values button will set the default values on the interface
alone.
1.
If the default values are desired, click the
Write
button.
ADC VelociGraph
Net 01 Mode 02
