Page | 5
For iBeam sensors, simply use the cables provided and connect to the EMITTER port on
your VG03. For sensors from other manufacturers, see the documentation that came with
your sensor.
Next, connect the sensor RECEIVERS to the VelociGraph.
The RECEIVER connections have the following connections:
FIGURE 2-4: The pin configuration for the Receiver Connectors.
For iBeam sensors, simply use the cables provided.
The RECEIVER connections
must be connected in the order of the ball path
, where
RECEIVER A is the receiver closest to the entry path of the projectile, and RECEIVER C is
the final receiver in the path of flight.
Power Connections:
Connect the AC Adaptor to the +24 VDC Female plug on the back of the enclosure. Please
be sure to use the AC Adaptor provided with the VelociGraph.
