background image

LTPH-TP-1044-01, Issue 1

 Provisioning

HXU-358 V1.04

April 6, 2001

 29

Setting Autologout Time

You can set the time (15 min, 30 min, 60 min, or none) that the HXU-358 will 
logout.

Figure 17.

Config Menu: Autologout Defaults

1

Select Autologout from the Config menu.

2

Change the time within the Auto Logout Time settings by pressing the 

, and then press 

.

 Main  Monitor  History  

Config

  Test  Inventory  Quit  Help

                        +-------------------+
                        | T1/E1 Ports       |
                        | DS3 Port          |

                        | Password          |
                        | Date and Time     |
                        | Card ID           |

                        | SW Download       |
                        | X-Connect

|

                        | 

Autologout Time

   |

                        | +--------------------------------+
                        | | Auto Logout Time:  

15 min 

     |

                        | +--------------------------------+

                        +-------------------+

                 Note: Setting Defaults will reset the system.

ID: Test card | Card 'B'       03/30/01 12:33:56               ALARMS: NONE

SPACEBAR

ENTER

Summary of Contents for HiGain HXU-358













































































Reviews: