Configuring with an ASCII Terminal
5-20
Campus-REX RS Interface Card User Manual
To set or change these identifiers:
1
From the System Parameters menu, type
then press
. The
system prompts you to enter the Unit ID.
2
Type a unique identifier for the unit, up to 64 characters then press
. The system displays the System Parameters menu.
3
Type
then press
. The system prompts you to enter the
circuit ID.
4
Type a unique identifier for the circuit, up to 32 characters then press
. The system displays the System Parameters menu.
C
ONFIGURING
L
OOPBACKS
Loopbacks provide a way to test the data communication path between the
Campus unit, the remote unit, and the remote host equipment. Depending on
the remote unit, the Campus system supports the following types of
loopbacks:
•
The Local to Local loopback tests the local data port and a small portion
of the Campus-REX RS Interface Card.
•
The Local HDSL loopback tests the local data port and the entire data
path of the local Campus-REX RS Interface Card, including the local
HDSL transceiver. The data path in this loopback extends to the HDSL
line transformer, and causes the HDSL link to go down (a Link Alarm
occurs).
•
The Remote to Local loopback tests the local data port, the entire data
path inside the local Campus unit, the HDSL line, the HDSL transceivers
of both units, and most of the internal data path inside the remote unit.
If both the local and remote units have a Campus-REX RS
Interface Card, no loopbacks are supported.
3
ENTER
ENTER
4
ENTER
ENTER
CAD1069i5.book Page 20 Thursday, May 30, 2002 7:32 AM
