ADC Campus-REX RS Interface Card User Manual Download

Page: 73 / 148

Configuring and Monitoring through the LCD

Campus-REX RS Interface Card User Manual

4-13

To view the system information:

Press Escape until

CAMPUS RS I/F: REX

displays.

Press Enter to view the firmware version and PROM checksum.

Press Next to scroll through the remaining options.

IEWING

TATUS

NFORMATION

The LCD provides access to the following status information:

•

Ethernet information, such as the MAC address and 10BASE-T status

•

Current HDSL margin

•

Frame statistics on the Ethernet and HDSL ports

Ethernet Information

You can view the following information about the Ethernet port:

•

MAC address

•

current 10BASE-T status

To view Ethernet information:

Press Escape until

CAMPUS RS I/F: REX

displays.

Press Next twice.

DATA PORT CONFIG & STATUS

displays.

Press Enter.

CONFIGURE REX SETTINGS

displays.

Press Next to view the

MAC ADDRESS

Press Next again to view the current status of the 10BASE-T port.

CAD1069i5.book Page 13 Thursday, May 30, 2002 7:32 AM

Summary of Contents for Campus-REX RS Interface Card





















































































































































Search results

Summary of Contents for Campus-REX RS Interface Card

Reviews:

Related manuals for Campus-REX RS Interface Card

Brands by name

Popular brands

ADC Campus-REX RS Interface Card, User Manual

Search results

Summary of Contents for Campus-REX RS Interface Card

Reviews:

Related manuals for Campus-REX RS Interface Card

Brands by name

Popular brands