Configuring with an ASCII Terminal
Campus-REX RS Interface Card User Manual
5-3
L
OGGING
O
NTO
A
R
EMOTE
C
AMPUS
U
NIT
This section describes how to log on to a remote Campus unit.
1
Press the spacebar on the ASCII terminal keyboard several times until
the baud rate is established and the Login Password screen displays on
the terminal monitor.
2
Press
to log on. If you have changed the password, type your
password then press
. The Main Menu displays.
3
Press then
press
.
The menu header changes to indicate the remote unit ID as the local unit,
and local unit ID as the remote. This shows that the terminal program is
physically connected to the local unit, but is configuring as if it were
connected to the remote unit. The prompt changes to REMOTE LOGON
PASSWORD.
If the remote unit is a Campus-REX, the screens and procedures on the
Remote Main Menu are identical to those on the Local Main Menu,
except the REMOTE LOGON option is unavailable. If the remote unit is
not a Campus-REX, the screens will be those for the remote interface
card. See the User Manual for the interface card for a description of the
screens and configuration options.
L
OGGING
O
FF
OF
A
C
AMPUS
U
NIT
From the Main Menu, type
then press
to log off of the unit menus.
If the Main Menu is not the current menu, type
then press
until the
Main Menu displays.
ENTER
ENTER
5
ENTER
Q
ENTER
R
ENTER
CAD1069i5.book Page 3 Thursday, May 30, 2002 7:32 AM
