background image

 

 150-319-205-05, Issue 5

ii

January 26, 2000

 ELU-319 List 5E and List 6E

Revision History of This Manual

To order copies of this document, use document catalog number 150-319-205-05.

Copyright

January 26, 2000

© 2000 ADC DSL Systems, Inc. All rights reserved.

Trademark Information

ADC is a registered trademark of ADC Telecommunications, Inc. HiGain is a registered trademark of ADC DSL Systems, Inc. 
No right, license, or interest to such trademarks is granted hereunder, and you agree that no such right, license, or interest 
shall be asserted by you with respect to such trademark. Other product names mentioned in this practice are used for 
identification purposes only and may be trademarks or registered trademarks of their respective companies.

Disclaimer of Liability

Information contained in this document is company private to ADC DSL Systems, Inc., and shall not be modified, used, copied, 
reproduced or disclosed in whole or in part without the written consent of ADC.

Contents herein are current as of the date of publication. ADC reserves the right to change the contents without prior notice. 
In no event shall ADC be liable for any damages resulting from loss of data, loss of use, or loss of profits, and ADC further 
disclaims any and all liability for indirect, incidental, special, consequential or other similar damages. This disclaimer of 
liability applies to all products, publications and services during and after the warranty period.

Revision

Release Date

Revisions Made

01

August 21, 1998

Initial Release

02

March 26, 1999

Corrections to Technical Specifications

03

April 20, 1999

Warranty modifications

04

January 26, 2000

Practice title change

05

February 8, 2002

ADC Rebranding

Summary of Contents for 150-1236-55

























































Reviews: