Helpful Tips
User Manual - page 62
www.adblighting.com
Issue 1.1
10.2.3 Adding the scroller
•
Screw the adapter plate to the scroller. This adapter plate fits a wide range of
different scrollers.
•
Insert the scroller into the
WARP
.
•
Connect the safety cable.
•
Connect the XLR4 cable
24
.
•
Set the DMX address of the scroller to 1. (If dc power is necessary, wait until after the
power up of the
WARP/M
)
•
Rebalance the
WARP
25
•
Power up the
WARP
.
10.2.4 DMX mapping for the colour scroller
WARP/M
remaps the scroller address
26
. The scroller becomes a part of the
WARP
personality.
The
WARP/M
DMX footprint includes 8 DMX addresses for the external output
27
. When the
data appears on the XLR4 connector, these addresses are shifted to a start address = 1.
User benefit: you can set all scrollers to DMX start address = 1.
Example: scroller has 3 parameters: colour, speed, fan.
External 1 becomes colour, external 2 becomes speed, …
10.2.5 Removing the scroller
After you have removed the scroller, you must rebalance the
WARP/M
.
24
XLR4 cable delivered with each ADB scroller and adapter plate
25
See chapter 3.5.1
26
Scroller address must be set to 1 for all scrollers
27
See chapter 5.1.1
