ADB M 5083 User Manual Download Page 41

Page: 41 / 70

Web page

www.adblighting.com

User Manual - page 39
Issue 1.1

6.3

WARP

Scanner

WARP/M

Scanner V2.2 is a PC program which helps to find all the

WARPs

on the lighting

network and gives an overview of all statuses of online

WARPs

. This scanner program is

available on the ADB web site.

WARP

Scanner runs on Windows NT and XP.

This program auto-detects all

WARPs

on the Network. Double click on one of the available

WARPs

, to open its Home webpage.

The

WARP/M

Scanner program will only detect

WARPs

if the PC’s network card is set on a

specific IP address and Subnet, or with DHCP

The

WARP

Scanner program displays a list of devices, with the IP address, the Name, the

Software Version, DMX address and status. Status is similar as the

WARP

messages on the

local display.

Software update: use the Browse function to select the file to be uploaded. Update All will
upload the software to all available

WARP

on the network.

See Addendum 1

See Chapter 7 “ Messages on local display”

See also chapter 8 “Software upload”

Summary of Contents for M 5083







































































Search results

Summary of Contents for M 5083

Reviews:

Brands by name

Popular brands

ADB M 5083, User Manual

Search results

Summary of Contents for M 5083

Reviews:

Brands by name

Popular brands