ADB DTC, Instruction Manual

Page: 8 / 41

AM.04.510e - Edition 1.5 8
Safety
2 Safety
Read all warnings carefully. Failure to do so may result in personal injury, death, or property
damage.
2.1 Use
To use the equipment safely:
„ Refer to the International Standard IEC 61820, Electrical installation for lighting and
beaconing of aerodromes - Constant current series circuits for aeronautical ground lighting -
System design and installation requirements
, and to the International Standard IEC 61821,
Electrical installations for lighting and beaconing of aerodromes - Maintenance of
aeronautical ground lighting circuits
for instructions on safety precautions.
„ See FAA Advisory Circular AC 150/5340-26, Maintenance of Airport Visual Aids Facilities ,
for additional instructions on safety precautions.
„ Observe all safety regulations. To avoid injuries, always remove power prior to making any
wire connections and touching any live part. Refer to the International Standards IEC 61820
and IEC 61821.
„
In addition for a parallel power supply also take into account the International Standard IEC
60598 (for class I equipment).
„
Read and become familiar with the general safety instructions provided in this chapter
before you install, operate, maintain or repair the equipment.
„
Read and carefully follow the instructions given throughout this manual before installing,
operating, maintaining, or repairing the equipment.
„
Store this manual within easy reach of personnel installing, operating, maintaining or
repairing the equipment.
„ Follow all applicable safety procedures required by your company, industry standards, and
government or other regulatory agencies.
„ Obtain and read Material Safety Data Sheets (MSDS) for all materials used.
2.2 Safety symbols
Become familiar with the safety symbols presented in this chapter. These symbols will alert you
to safety hazards and conditions that may result in personal injury, death, or property and
equipment damage.
WARNING 1 : Failure to observe this warning may result in personal injury, death, or
equipment damage.
WARNING 2 : Risk of electrical shock. Disconnect equipment from line voltage.
Failure to observe this warning may result in personal injury, death, or equipment
damagee.
WARNING 3 : Wear personal protective equipment. Failure to observe may result in
serious injury.
WARNING 4 : Do not touch. Failure to observe this warning may result in personal
injury, death, or equipment damage.