ADB DTC, Instruction Manual

Page: 11 / 41

11 AM.04.510e - Edition 1.5
Safety
2.9 Maintenance and repair
Allow only skilled personnel to perform maintenance, troubleshooting, and repair tasks. Only
persons who are properly trained and familiar with ADB equipment are permitted to service the
equipment.
„
Always use safety devices when working on the equipment.
„ Follow the recommended maintenance procedures in your equipment manuals.
„
Do not service or adjust any equipment unless another person trained in first aid and Cardio
Pulmonary Resuscitation (CPR) is present.
„
Connect all disconnected equipment ground cables and wires after servicing equipment.
Ground all conductive equipment.
„
Use only approved ADB replacement parts. Using unapproved parts or making unapproved
modifications to equipment may void agency approvals, impair specified performance and
create safety hazards.
„ Check interlock systems periodically to ensure their effectiveness.
„ Do not attempt to service electrical equipment if standing water is present. Use caution
when servicing electrical equipment in a high-humidity environment.
„ Use tools with insulated handles when working with electrical equipment.
2.10 CE certification
The equipment is CE certified. It means that the product complies with the essential
requirements concerning safety and hygiene. The directives that have been taken into
consideration in the design are available on written request to ADB.
2.11 Guarantee
LED Products of ADB Airfield Solutions manufactured and sold by ADB or its licensed
representatives, meets the corresponding requirements of FAA, ICAO and IEC.
They are, with the exception of obstruction lights, guaranteed against mechanical, electrical, and
physical defects for a period of four years after the date of installation with a maximum of five
years after delivery. Said products are guaranteed to be merchantable and fit for the ordinary
purposes for which such products are made.