ADB DTC, Instruction Manual

Page: 16 / 41

AM.04.510e - Edition 1.5 16
Install and replace the complete fixture
Curved section only
1. Make sure the ADB logo (A) points towards
the centre (B) of the curve of the section.
Install
Lubricate and connect
1. Lubricate the labyrinth gasket (A) with
water.
2. Apply adhesive on the first three threads of
the threaded holes in the mounting support.
Use adhesive A.
3. Connect the plug (B) to the receptacle.
A
B
A
Note
To facilitate the use, add
some soap to the water.
CAUTION
Do not use silicon or any
other type of grease. Avoid
the use of soap that
contains silicone or
glycerine.
Note
For a fixture with two plugs, INPUT 1 feeds side 1 and INPUT 2 feeds side 2.
B
A