4.3 Equipment required for installation
4.3.1 Equipment required, but not supplied
In the table below you will find a list of the equipment required for installation, but not supplied with the lights:
Description
CN
Quantity
L-867 base plate assembly and gasket (if base mounted)
see cat.leaf.
A/R
L-867 deep base (if base mounted)
see cat.leaf.
A/R
Conduit elbow (if mounted on conduit elbow)
1409.00.012
A/R
Breakable coupling MR/F2 for mounting on 60mm O.D. conduit
1409.05.027
A/R
Breakable coupling for ground mounting
1409.06.020
A/R
2-core cable with factory-moulded FAA L-823 plug
-
1/light
Primary connector kit, 1-pole
-
1/light
Secondary connector kit, 2-pole
-
1/light
Natural hydraulic vacuum silicone grease
7850.42.210
A/R
Scotch N° 33 electrical tape
7637.55.123
A/R
Standard leveling device
1570.05.410
A/R
Electronic leveling device
1570.05.400
A/R
CN = Order Number
A/R = As requested
Notes
*
= supplied with some versions of the UEL
4.4 How to mount the UEL at ground level
4.4.1 Introduction
The UEL is mounted on a breakable coupling which is screwed into a mounting device such as a conduit elbow or a deep
base with cover.
4.4.2 Procedure
1. UEL-1-150 steady burning light
High Intensity Unidirectional Elevated Light for Approach, Threshold and Runway End and for Sequenced Flashing Lights (SFLS)
Installation
10
Copyright
©
ADB Safegate, All Rights Reserved
