3.0 Introduction
3.1 General information
3.1.1 UEL
The UEL-1-150 steady burning lights are used for:
•
Precision Approach lighting in Cat. I, II and III in white and red light,
•
Threshold and Threshold wingbar lighting in Cat. I, II and III in green light,
•
Runway end lighting in Cat. I, II and III in red light,
•
Supplementary elevated stopbar lights.
The UEL-1-120 flashing lights are used for:
•
Sequence Flashing Lights (SFLS) or Runway Threshold Identification Lights (RTILS), using a low voltage (400V) Xenon flash
lamp.
3.1.2 Model definition
•
The UEL-1-150 is a steady burning unidirectional elevated light.
•
The UEL-1-120 is a flashing unidirectional elevated light used in a flashing system in combination with the control
cabinets FCU.
Note
Refer to the exploded views, see §
.
3.1.3 Installation
They are shipped ready for installation and can be mounted in three different ways, on any support with a 60 mm outer
diameter mounting interface:
•
At ground level
•
On a 60 mm O.D. conduit
•
On a safety approach mast
3.2 Product data
3.2.1 Equipment supplied
UEL units are either packed individually in a durable, cushioned and corrugated cardboard box, labeled with ADB SAFEGATE
and ordering numbers, or on pallet boxes in larger quantities.
UM-4020 / AM02-630e, Rev. 2.0, 2020/05/19
7
Copyright
©
ADB Safegate, All Rights Reserved
