ADB Safegate EREL, User Manual

Page: 13 / 50

•
Use of LED light source eliminates filter replacement and colour shifts when viewed at various angles or CCR step settings.
•
Upper body can be replaced without realignment of the fixture.
•
Sealed entry at cord set to optical assembly interface prevents insect entry. IP 55 protection degree.
•
Omnidirectional beam for circular guidance is standard for bidirectional Runway Edge fixture. No need for additional
optical system.
•
Finish: stainless steel hardware, phosphating and baked polyester electrostatic powder coating, aviation yellow color.
Toe-in Color Coding
For toe-in, the part number scheme assumes the observer is facing both the
light and the runway centerline. For example, toe-in option 3 means that both
the left and right side are toed in the direction of the centerline. If the
equipment (A) has a toe-in (D), the toe-in is in compliance with the relevant
ICAO or FAA requirements. The indication left side (L) or right side (R) always
refers from the equipment to the centerline (C) of the runway (B).
Photometric Curves
Figure 1: Photometry - Runway Edge 60 meters (white light)
Additional photometric performance data and curves can be found in the Product Center on our website
(www.adbsafegate.com) under the “Photometric Data” tab or by contacting your local ADB SAFEGATE representative.
Dimensions and Weight
Diameter and height: 166 × 233 mm / 6.54 × 9.17 in
Without mounting interface
Weight: 3.36 kg / 7.41 lb
Accessories
Aiming Device: 1408.35.130
AM.03.120e, Rev. 3.4, 2019/03/29 7
Copyright
©
ADB Safegate, All Rights Reserved