ADB Safegate EREL, User Manual

Page: 29 / 50

CAUTION
The spacer is not rectangular. Install the spacer correctly.
3. Install the washers and the screws for the optical cover clip (C). See § Screws and torques (torque).
4.3.4 Part replacement - optical kit
Parts: see § Exploded view .
•
Optical kit:
•
LED MCPCB
•
Optical block
•
Protection rings
•
Optical cover gasket
•
Body gasket
CAUTION
The cooling block for the FAA L-862E green differs from the cooling block used for all other applications. If you
modify a fixture into or from FAA L-862E green from or into another function, also change the cooling block.
Note
The LED MCPCB and the optical block are supplied as a kit, complete with all components for replacement i.e.
screws.
Tools:
•
Screwdriver, Torx T20
Prepare
1. Do not mix optical blocks and LED MCPCBs from different deliveries. The optical blocks can change due to the future
evolution of the available LEDs.
Remove - Step 1
1. Remove the complete optical head. See § Part replacement - complete optical head .
2. Put the complete optical head on a clean surface.
3. Make sure that the complete optical head is earthed.
AM.03.120e, Rev. 3.4, 2019/03/29 23
Copyright
©
ADB Safegate, All Rights Reserved