Adaptive® JUNIOR – Technical and HMI User Guide
REV 1.04
9
1.11.
COM USB Interface
The USB 2.0 compatible interface is available through a micro USB connector providing a serial communication
interface to be used with the Adaptive HMI software or the standard serial protocol detailed within this document.
1.12.
Mechanical Dimensions
Figure 5. Mechanical Dimensions
Height and clearance information is shown in Table 5.
Component height on the bottom side
3mm
PCB substrate thickness
1.6mm
Component height on the top side
22mm
Total height
26.6mm
Recommended minimum clearance around the board
5mm
SD card protrusion
1.5mm
Micro USB connector protrusion
1.5mm
Table 5 Board height information and Clearance
