EINAR
USER MANUAL
Page 47/51
Adaptive Recognition
America
Adaptive Recognition
Hungary
Adaptive Recognition
Nordic
Adaptive Recognition
Singapore
WWW.ADAPTIVERECOGNITION.COM
the characters on Italian license plates are smaller than those of countries geographi-
cally further north. The easiest way to check the character size of a license plate is to
display the "ANPR Status" OSD layer in Live View and look at the "Avg. char height:" to
see the character size {
m.
Use real, moving vehicle(s) to test the settings; it's not enough to just show a plain
license plate in front of the camera.
n.
Adjust the
camera’s direction and angle of view
to make the license plate visible for at
least one, but preferably two seconds with the right character size.
2.
Find the camera on the network, then access the camera's web interface
a.
From the MAC address of the camera, you can calculate the IP address that is always
available. It is always in the format 169.254.aa.bb, where the number aa/bb is the de-
cimal value of the last two pairs of numbers in the MAC address {
}.
However, if a DHCP server is available on the network, the camera will also get an IP
address from the DHCP server. You can access the camera from both IP addresses.
b.
Optionally, you can use the AR Device Tool to locate the camera on your local network.
c.
You can access the camera's web interface with the admin/admin
username/password pair. It is strongly recommended to change the default password.
3.
Some simple but important basic settings:
a.
Upload the ANPR Engine and License Key to your camera {
} according
to the email received when you purchased the camera. Check the ANPR Engine quar-
terly to ensure that the camera is always running with the latest version of the engine.
You will also need to update the License Key for updates after a year.
b.
Check that the camera has the latest firmware. You can download the latest FW from
ATSS. Upload it in {
}.
c.
Check/set the camera time {
}.
d.
If you haven't already done so, adjust the camera angle of view and take into conside-
ration the character sizes as well {see point (1) in this chapter and
}.
e.
Set the appropriate Image presets for your installation {
f.
With the above steps and the default camera settings, you will get license plate reading
results. These events will be listed in the Live interface below the live image.
4.
Fine-tuning
Besides checking everything in the Settings menu, there are a few settings that, in addition to
the above, are particularly recommended to check/fine-tune to achieve above-average license
plate recognition accuracy.
Summary of Contents for Einar
Page 1: ......
