EINAR
USER MANUAL
Page 30/51
Adaptive Recognition
America
Adaptive Recognition
Hungary
Adaptive Recognition
Nordic
Adaptive Recognition
Singapore
WWW.ADAPTIVERECOGNITION.COM
7.6.
SYSTEM / IO
The I/O ports allow communication between the information processing system (in this case, the ca-
mera) and the outside world (e.g., a person, computers, alarms, barriers, etc.).
The conditions related to the information coming from the outside world to the camera and arriving
through the input ports (input signals) can be adjusted by clicking the [Edit] button at the Inputs tab.
When the port's active state is set to "Low", the signal is only received from a detector if the device
connected to the camera sends about 0-1 VDC. When the port's active state is set to "High", then the
signal is received from a detector if the device connected to the camera sends about 2-24 VDC.
You can also modify the Output ports at the Outputs tab.
The following parameters can be adjusted after clicking on the Edit button:
•
Active state: The active state of the port. If it is "Open", the port is open when an event occurs.
If it is "Closed", the port closes when an event occurs.
•
Impulse length (ms): In the case of activating the output port, the length of the active state can
be adjusted.
Summary of Contents for Einar
Page 1: ......
