Adaptive Recognition Einar User Manual Download Page 6

Page: 6 / 51

EINAR

USER MANUAL

Page 6/51

Adaptive Recognition

America

Adaptive Recognition

Hungary

Adaptive Recognition

Nordic

Adaptive Recognition

Singapore

[email protected]

WWW.ADAPTIVERECOGNITION.COM

AR DEVICE TOOL

With the AR DeviceTool, you can discover Einar cameras on the local network and upload Firmware,

License and Engine files to them. Download the program here:

AR DeviceTool

. It runs on Windows

operating system.

2.1.

FINDING CAMERAS

Once started, the program lists the cameras detected on the local network. The camera name, product

family name, type, firmware version, IP address, MAC address and brief information about the current

upload process will be displayed.

The currently available cameras are marked with green color in the first column. The red color in-

dicates a previously discovered camera that has not been available since then.

Double-click on the selected camera to open its web interface in the default browser.

Summary of Contents for Einar




















































Search results

Summary of Contents for Einar

Reviews:

Related manuals for Einar

Brands by name

Popular brands

Adaptive Recognition Einar, User Manual

Search results

Summary of Contents for Einar

Reviews:

Related manuals for Einar

Brands by name

Popular brands