Equipment overview
7
AlphaEclipse 3600 Series A Sign Installation Instructions (9711-8001C)
September 28, 2004
Back and side views
Item
Name
Description
A
Cube support frame
Each cube is attached to the cube support frame:
B
Conduit holes
Four punchout holes located on the bottom of the wireway. These holes can be used to attach conduit in
order to route power and communication wires to the sign.
C
Optional conduit holes
Locations where up to 1.38-inch conduit holes can be drilled.
D
Wireways
Used to route power and communication wires to all the LED modules.
E
Lifting hook
Used to lift the sign during installation. These hooks should be removed after the sign is installed.
F
Wireway connection
holes
Used to route power and communication wires between each LED module.
Shown below is a 64 x 32 pixel sign with the wireway on the right side of the sign. Other sign sizes are similar.
Back view
Side view
(wireway side)
Side view
(non-wireway side)
D
C
E
A
F
B
