Chapter 11: Solving Problems
●
146
LogOut
The user could not be logged out
MaybeReadCache
Could not set read cache mode to 'enabled when protected by battery'
MaybeWriteCache
Could not set write cache mode to 'enabled when protected by battery'
MergeOwnNS
Could not copy the configuration from the non-shared logical drives
Rebuild
Could not set the drive to the specified rebuild state
RemoveAHS
Could not delete the dedicated hot spare drive
RemoveFromDiskSet
Could not remove drives from the specified diskset
RemoveHSP
Could not delete the specified hot spare drive
RemoveSHS
Could not delete the specified standby hot-spare drive
ReplaceDHS
Could not replace the specified failed drive
ScanDrives
Could not perform the bus rescan
SetArrayOnline
Could not send the Array Optimal command to the specified controller
SetChannelInitiatorId
Could not set the specified SCSI initiator ID
SetContDiskCachePolicy
Could not change the specified global drive cache policy
SetHostId
Could not set the specified controller name
SetITNexusLossTime
Could not change I_T nexus loss time
SetMergeGroup
Could not set the specified merge-group number
SetPartnerId
Could not set the specified partner controller name
SetSpareSet
Could not change the specified spare set attribute
SetToAHotSpare
Could not create a dedicated hot spare drive
SetToDefunct
Could not set the specified drive to failed
SetToEmpty
Could not remove the specified failed drive
SetToHotSpare
Could not create a hot-spare drive
SetToOnline
Could not set the specified failed drive to optimal
SetToSHotSpare
Could not create a standby hot-spare drive
SetWce
Could not change the write-cache mode
SyncArray
Could not start the array verify
SyncLogDrive
Could not start the logical drive verify
TargetInfo
Could not write the logical drive target information
Error
Error Message Text
