Adaptec 5ANA-940 User Manual Download Page 82

Page: 82 / 152

6-2

ANA-5910/5930/5940 User’s Guide

Installing Adaptec ATM Software for DOS/
Windows

To install Adaptec ATM software for DOS/Window:

Insert the ANA-59x0 DOS WIN diskette into a floppy disk
drive.

Change to the drive that contains the ANA-59x0 DOS WIN
diskette, type the following command, and press Enter:

Install

At the Welcome To ATM Installation Utility! screen, press
Enter

To accept the default drive:\directory installation location for
the Adaptec ATM software (

C:\ADPT25LE

), press Enter, or

type a different drive:\directory name at the

ADPT>

prompt,

and press Enter.

The installation utility creates the directory you specified
above and copies the ATM files to your hard drive.

At the INSTALLATION COMPLETE! screen, press Enter.

At the Welcome To ATM Installation Utility! screen, press
Enter

Summary of Contents for 5ANA-940

























































































































































Search results

Summary of Contents for 5ANA-940

Reviews:

Related manuals for 5ANA-940

Brands by name

Popular brands

Adaptec 5ANA-940, User Manual

Search results

Summary of Contents for 5ANA-940

Reviews:

Related manuals for 5ANA-940

Brands by name

Popular brands