5-28
ANA-5910/5930/5940 User’s Guide
Options:
Commands:
Any command listed with the 'help' command when in
'aatmdiag'. Type 'aatmdiag help' for the list of valid
commands.
Type help at the ADM:x>
prompt for additional help while in the
aatmdiag.exe
utility.
ADM:0> help
General commands supported:
Specific diagnostic test commands supported:
-c number
specifies the controller number
-d <0-1>
indicates the log level for loop command
0 = Inhibit pass messages (default)
1 = Print pass messages
-f <filename>1
specifies the input file (i.e., if you created
a batch file with the tests listed in the file)
-l <log Filename>
specifies the log file to use
-h
display this information
info
Displays network interface controller
general information.
log_level
Set the diagnostics log level.
loop
Loop on specified list of diagnostic
commands.
quit | exit
Quit ATM diagnostic program.
selftest
Execute Self Test diagnostic tests.
sar_mem_e
Execute extended SAR Memory
diagnostic tests.
atm_external
Execute ATM External Loopback tests
(loopback cable required).