5-2
ARO-1130U2 Installation and Hardware Guide
Note:
If your RAIDport III system has an additional Adaptec
AIC
™
-78xx device (for example, AHA
®
-2940 or AHA-3940
host adapter) installed (which is not associated with the
RAIDport), the NT driver for these adapters must be from
the Adaptec 7800 Family Manager Set 2.10 or higher. Ultra2
SCSI host adapters require v3.00 or higher of the Family
Manager Set. Furthermore, if the Array1000 BIOS & Driver
Selection Utility determines you require Disk B, refer to
Appendix B.
Installing the Array1000U2 Driver for Windows NT
To begin driver installation, see either Installing the Driver When
Installing Windows NT on page 5-3, or Installing the Driver When Win-
dows NT is Already Installed on page 5-4.
Note:
We recommend that you install your Windows NT
operating system on a fault-tolerant array (RAID 5, 1, or
0/1) to take advantage of the redundancy and performance
features of the array.
Note:
If your system: 1) is RAIDport II or III equipped; AND
2) has an Adaptec AHA-294x host adapter installed; AND 3)
requires driver Disk B (as determined by the Array1000 BIOS
& Driver Selection Utility), see Using the ARO-1130U2 with an
AHA-294x, AHA-3940, or Other AIC-78xx Based Host Adapter
and Driver Disk B (Windows NT Only) on page B-2 for instruc-
tions on installing the Array1000U2 Miniport Driver.
