7-1
7
▼ ▼ ▼ ▼
Installing the Software
Driver for SCO UnixWare
This chapter explains how to install the ARO-1130U2 software driver
(
cda1000
) for SCO UnixWare 7.0. Before installing the driver, make
sure you have completed the following:
■
Installed the ARO-1130U2 in your system. (See Chapter 2)
■
Run the Array1000 BIOS & Driver Selection Utility to deter-
mine which of the two Array1000U2 Family Manager Set
driver diskettes (Disk A or Disk B) is required to install the
UnixWare driver. (See Chapter 3)
■
Created the first array using the ArrayConfigU2 Utility, if you
plan to boot from an array. (See Chapter 4)
Once UnixWare and the driver are installed, install Adaptec CI/O
Management Software from the server’s X Window. Refer to the
Adaptec CI/O Management Software User’s Guide
for instructions on
installing and using the software.
