5-1
5
▼ ▼ ▼ ▼
Installing the Software
Driver for Windows NT
This chapter explains how to install the ARO-1130U2 software driver
(
cda1000.sys
) for Windows NT (Windows NT 4.0 Server and
Workstation). Before installing the driver, make sure you have com-
pleted the following:
■
Installed the ARO-1130U2 in your system. (See Chapter 2)
■
Run the Array1000 BIOS & Driver Selection Utility to deter-
mine which Array1000U2 Family Manager Set driver diskettes
(Disk A or Disk B) is required to install the Windows NT
driver. (See Chapter 3)
■
Created the first array using the ArrayConfigU2 Utility, if you
plan to boot from an array. (See Chapter 4)
Once Windows NT and the driver are installed, install
Adaptec CI/O Management Software and use it to add, delete, and
manage arrays from the server console. Refer to the Adaptec CI/O
Management Software User’s Guide
for instructions on installing and
using the software.
