6-1
6
▼ ▼ ▼ ▼
Installing the Software
Driver for Novell NetWare
This chapter explains how to install the ARO-1130U2 software driver
(
cda1000h.ham
) for Novell NetWare (NetWare 4.11 and 5.0). Before
installing the driver, make sure you have completed the following:
■
Installed the ARO-1130U2 in your system (See Chapter 2)
■
Run the Array1000 BIOS & Driver Selection Utility to deter-
mine which Array1000U2 Family Manager Set driver diskettes
(Disk A or Disk B) is required to install the NetWare driver.
(See Chapter 3)
■
Created the first array using the ArrayConfigU2 Utility, if you
plan to boot from an array. (See Chapter 4)
Once NetWare and the driver are installed, install Adaptec CI/O
Management Software from the server console. Refer to the Adaptec
CI/O Management Software User’s Guide
for instructions on installing
and using the software.
