CLEARPASS
Full-Body Security Screening System
OPERATION
MANUAL
Identification
ADN190.00.00.000 OM2
Revision
1
Date
02.2022
Page
6 of 52
X-RAY PROTECTION
The System is designed in compliance with national and international radiation safety
standards. Personnel working with the System should strictly observe measures aimed at pre-
venting X-ray exposure of people.
Misuse of the X-ray equipment may cause harm to human health. Accordingly, the in-
structions contained herein, and other operational documentation must be thoroughly read and
understood before attempting to put this equipment in operation.
It is important that the personnel authorized to operate, adjust/align and maintain the
System is informed about the danger of ionizing radiation long-term exposure, properly trained
and qualified, as well as able to undertake all required safety precautions. The manufacturer,
his/her authorized agents and representatives are not liable for injury or damage that may result
from System improper use.
ENVIRONMENT PROTECTION
The System consists of elements and materials that constitute danger to the environment
(electronic components, lead, accumulator batteries, etc.). When the lifecycle of such elements
and materials, which belong to toxic waste, comes to the end, they require special treatment
and disposal in accordance with the requirements of international and national regulatory legal
acts.
Once the lifecycle of the System comes to an end, for the disposal of the elements and
materials contained herein the manufacturer advises to contact his/her authorized representa-
tive or an enterprise that collects, reprocesses, recycles waste or production waste.
IF X-RAY PROTECTION MEASURES ARE NOT OBSERVED, THE
SYSTEM MAY BE DANGEROUS TO PERSONNEL WORKING
WITH IT AND TO THIRD PARTIES.
