Adance ADE-2022-C, Maintenance Manual

Page: 32 / 50

ADE- 2022-C Page 32 of 50
Variable
Variable Variable
Variable Value
Value Value
Value Units
Units Units
Units Description
Description Description
Description
Temperature alarms Temperature alarms Temperature alarms Temperature alarms
ALU 7 Maximum temperature alarm
ALL 7 Minimum temperature alarm
ALd 30 Temperature alarm delay
EdA 30 Temperature alarm delay at end of defrost
tbA Yes Silencing alarm relay
Other Other Other Other
tCy
Read
Only
Cycle duration
tP1
Read
Only
First phase duration
tP2
Read
Only
Second phase duration
tP3
Read
Only
Third phase duration
Adr - Address for RS485
bUt 60 Buzzer activation at the end of the cycle
tPb NTC Type of probe
rEL - Release code
Ptb - Parameter code
dP2 -
Cycles Cycles Cycles Cycles
Cy1 Cy1 Cy1 Cy1 - -- - Soft Chill (90 minutes) Soft Chill (90 minutes) Soft Chill (90 minutes) Soft Chill (90 minutes) Cycle 1 settings Cycle 1 settings Cycle 1 settings Cycle 1 settings
CyS tiM Cycle setting
dbC No Defrost before cycle
iS1 0 Insert probe set point first phase
rS1 -15 Room probe set point first phase
Pd1 Off Maximum time for first phase
iS2 0 Insert probe set point second phase
rS2 -1 Room probe set point second phase
Pd2 1.3 Maximum time for second phase
iS3 0 Insert probe set point third phase
rS3 0 Room probe set point third phase
Pd3 Off Maximum time for third phase
dbH Yes Defrost before holding cycle
HdS 3 Set point for holding phase