ADE- 2022-C
Page 23 of 50
20
20
20
20
Runner Replacement
Runner Replacement
Runner Replacement
Runner Replacement
To replace a drawer runner the Insulated container and drawer front will need to be
removed to gain access (Chapters 6 & 9).
First remove the container support from the failed runner by removing the M5 X 6
ST/ST countersink screw
(figure 23)
and the four off M5x8 (two off on right hand side
and two off on left hand side) holding the brace container support rear
(figure 23a)
the
container support can now be removed by lifting the front of the support and pulling
forward to detach it from the lancings on the runner inner beam.
(Figure: 23b)
Figure 23: Remove container support retaining screw
Figure 23a: Brace container support rear and four off M5x8
Figure 23b: Removal of container support from the drawer runner.
