ADE- 2022-C
Page 12 of 50
7
Worktop Re
Worktop Re
Worktop Re
Worktop Removal
moval
moval
moval
To remove the worktop, first remove the 4 off M5 X10 bolts from the rear of the
drawer, lift the rear of the worktop and push slightly forward to slide over and clear
from the front retaining slots
(figure 8)
. Replacement is the reverse of the removal
procedure.
NOTE:
NOTE:
NOTE:
NOTE: CORRECT LIFTING PROCEDURES SHOULD BE FOLLOWED
CORRECT LIFTING PROCEDURES SHOULD BE FOLLOWED
CORRECT LIFTING PROCEDURES SHOULD BE FOLLOWED
CORRECT LIFTING PROCEDURES SHOULD BE FOLLOWED
Figure 8: Worktop removal
8
Front Grille Removal
Front Grille Removal
Front Grille Removal
Front Grille Removal
To gain access to the electrical components it is necessary to remove the front grille,
to do this first remove the insulated container from the drawer, loosen the 2 off M5 X 8
ST/ST bolts located inside the drawer space, and loosen the 2 off M5 X 8 ST/ST screws
located externally at the side of the drawer. The front grille can now be removed by
pulling forward at the bottom and then down.
(figures 9/10).
NOTE: POWER MUST BE ISOLATED BEFORE REMOVING ANY PANELS
NOTE: POWER MUST BE ISOLATED BEFORE REMOVING ANY PANELS
NOTE: POWER MUST BE ISOLATED BEFORE REMOVING ANY PANELS
NOTE: POWER MUST BE ISOLATED BEFORE REMOVING ANY PANELS
Loosen:
2 x Screws
2 x Bolts
Figure 9 Figure 10
