© Adam Equipment Company 2018
6
3.3
SETTING UP
The WBW L scale comes with a stainless steel pan. Place it on the top if
already not installed.
Do not
press with excessive force as this could damage the load cell inside.
Level the scale by adjusting the four feet. The scale should be adjusted such
that the bubble in the spirit level is in the centre of the level and the scale is
supported by all four feet.
Attach the power supply module to the bottom of the scale and plug into the
mains.
Press the
[O/I]
key to start. The scale will first display the software revision,
followed by a self-test.
At the end of the self-test it will display zero weight, if the zero condition has
been achieved and the weighing unit that was in use last. A stable and zero
symbol indicators are also displayed.
Attach Power Supply
module here
