© Adam Equipment Company 2018
9
To charge the battery, simply attach the power supply module to the scale and plug
in. The scale does not need to be turned on.
The battery should be charged for 12 hours for full capacity.
Below the display is a LED to indicate the status of battery charging. When the scale
is plugged into the mains power the internal battery will be charged. If the LED is
green the battery is being charged. If it is red it is nearly discharged and yellow
indicates the battery is increasing the charge level. Continue to charge overnight
for a complete re-charge.
8.0 DISPLAY BRIGHTNESS
The brightness for the LED can be set by the user. See setting of the parameter “
S2 bL
” in
section 12.2.
9.0 AUTO POWER OFF
The auto power off can be set by the user to disable the feature or to a pre-set time
interval. See setting of the parameter “
S3 AoF
“ in section 12.2.
