EN
Personal Protective Equipment to be worn:
Safety footwear
Protective clothing Protective gloves
Safety goggles
2.4 Packaging
G-FLOW is supplied in a box bearing a label with the following data:
- Product
- Product version
- Gross weight
- Flow direction of the fluid (Up, Down, Right, Left)
2.5 Contents
Open the package with a pair of scissors or a cutter.
Qty
COMPONENT
1
G-FLOW meter
1
USE AND MAINTENANCE MANUAL
3 - OPERATING CONDITIONS
3.1 Environmental conditions
3.4 Display orientation
3.3 LCD display (only display version)
3.2 Allowed fluids / Forbidden fluids
ALLOWED
DIESEL FUEL (only diesel version) with 2 to 5.5 cSt viscosity (at 38°C).Minimum flash point (MF): 55°C OIL
(only oil version) with 10 to 2000 cSt viscosity (at 40°C).
FORBIDDEN
PETROL, LAMMABLE LIQUIDS (MF <55°C), SOLVENTS, FOOD LIQUIDS, CORROSIVE CHEMICALS, WATER
The LCD display on the G-FLOW has a numerical register and
different instructions that are displayed only when appropriate.
1. Partial register, total register and instructions
(ALERT, STOCK and PARTIAL TOTALISER)
2. Flat battery indicator
3. TOTAL key
4. RESET key
The regular shape of the G-FLOW meter allows the LCD display mask to rotate in 90° steps.
To rotate the LCD screen:
1.
Unscrew the 4 screws holding the mask to the flow meter’s body
2.
Turn the mask to the desired position, being careful not to disconnect or damage the signal cable
between the display and the REED sensors.
3.
Tighten the 4 screws holding the mask to the flow meter’s body.
Temperature: min. -20°C / max. +60°C (*)
Relative humidity: max. 90%
(*) Caution! The temperature limits shown refer to the components making up the meter and should be
respected to prevent any damages or malfunctions from occurring.
1
3
2
4
3.5 User controls - key
press normally
press and hold
G-FLOW is equipped with two keys that perform the main
functions (TOTAL and RESET)
