EN
1 - GENERAL WARNINGS
2 - SAFETY INSTRUCTIONS
2.1 Safety measures
IMPORTANT: It is essential to have understood the entire instruction manual before
performing any operation, so as to safeguard operator safety and to avoid potential product
damage.
CAUTION
:
Live equipment.Contact between the power supply and the liquid to be pumped must be
prevented at all costs. Connect all equipment in the work area to the earthing system. Immediately stop
operation in the event of electrostatic discharges or if you feel a shock. Do not use this device until the
problem has been identified and duly solved.
CAUTION
:
Flammable liquids.Observe the precautions against the risk of fire or explosion. Read
the safety data sheets to know the specific hazards of the fluids used. If there are flammable liquids in
the work area (petrol, glass cleaning liquids, etc.), you must be aware that the vapours produced can
ignite and explode. Only use the product in well-ventilated areas to prevent fires and explosions. Do
not connect or disconnect the power cables or turn the lights on and off in the presence of flammable
vapours.
Storing the manual:
This manual must be kept intact and fully legible. The end user and the skilled technicians
authorised with installation and maintenance of the product in question must be able to consult it at all times.
Reproduction rights:
This manual is the property of ADAM PUMPS S.p.A., which is the sole owner of all
rights provided for by applicable law, including without limitation copyright rules. All rights under these rules belong
to ADAM PUMPS S.p.A.: reproduction, even partial, of this manual, its publication, modification, transcription, public
disclosure, distribution, marketing in any form, translation and/or development, loan, or any other activity reserved by
law to ADAM PUMPS S.p.A.
2.3 Protective devices
Protective equipment characteristics: Wear equipment that is appropriate for the operations to be carried
out. Wear equipment that is resistant to the products used
CAUTION: Dangerous liquids. Read the safety data sheets to know the specific hazards
of the fluids used. When pouring dangerous liquids, always follow the safety measures
provided by the liquid manufacturer. Keep dangerous liquids in approved containers and
dispose of them in compliance with the applicable guidelines.
IMPROPER USE OF THE PRODUCT
Improper use can result in serious injury or death.
Do not operate the unit when fatigued or under the influence of alcohol or drugs.
Do not leave the work area while the product is powered or under pressure.
Turn all equipment off when not in use.
Do not blow compressed air through the meter.
Prevent liquids from drying inside the meter.
Do not alter or modify the product. Alterations or modifications to the product may invalidate the approvals and cause safety
hazards.
Place the pipes and cables away from traffic, sharp edges, moving parts, and hot surfaces.
Do not twist or bend the hoses too much, do not move the product by the hoses.
Keep children and animals away from the work area.
Observe all of the safety regulations in force.
ALWAYS KEEP A WORKING FIRE EXTINGUISHER IN THE WORK AREA.
In case of contact with EYE, SKIN, INHALATION INGESTION and refer to the fluid OF SAFETY DATA used.
