A - Unpacking the crate and box
Before beginning the installation we suggest unpacking and unwrapping everything. Be sure to set it aside
and out of the way to avoid damaging it or hurting yourself.
B - Marking the wall
Before you begin hanging the brackets you need to mark the wall in a few places.
(1) First, you need to have a clear idea of where on the wall the water feature is going to hang.
To help with this, your water feature is 36 inches tall by 21 inches wide
(2) Next, using a pencil, put a small dot on the wall to represent the top center of the water feature.
(3)Lastly mark where each stud is in the area of the water feature.
These marks will be covered by
the water feature when everything is
completed. You may want to use a stud finder to insure the accuracy
of the marks.
C- Locate and mount the wall bracket